Product Description:

The Laryngeal Mask (LM) made from the raw material of medical grade silicone or pvc, have such good performances as the tube with appropriate hardness, excellent biocompatibility: non-irritant to delicate mucous membrane, smooth round shaft can minimize trauma during insertion and withdrawal. The airway tube is highly flexible yet have a suitable degree of hardness, and the surface is finely embossed to enable smooth insertion, decreasing foreign body sensation and more comfortable to patients.15mm connector at the proximal end.

Intended Use

The laryngeal mask is a device that sits tightly over the top of the larynx. It can avoid tracheal intubation and can be used with spontaneous respiration or artificial ventilation.  Short  term use.

The Side effect of the Laryngeal Mask

When used in clinic, the Laryngeal Mask may cause mucous membrane of mouth stimulate, which will make the patient cough, retch, laryngospasm etc.

The product was sterilized by EO. The valid period of sterilization was 3 years.

Application:

1.      Remove the product from the pouch, and preventing to be polluted.

2.      Using a syring with Ruhr tapered joint to deflate the air completely (picture 1)

3.      In the back tip of the LMA, coating a small amount of water-soluble lubricants (or saline), and grip the LMA with a pen-style hand.

4.      Make the patient's mouth opening, and place the back tip behind the front teeth(picture 2)

5.      Assisted with the index finger along the jaw slowly, and pressed until feeling the resistance.(picture 3)

6.      Before removing the index finger, with your other hand pressing the endotracheal tube to prevent displacement(picture 4)

7.      Using a syring to open the valve, and inflate the air to the indicating pressure on the cuff(no more than the max capacity). Put into dental pad, fixed position, and maintain ventilation.(picture 5)

8.      After using, deflate the air completely, and then pull out LMA

The specification of Laryngeal Mask: